Need to join two pieces of liner together using EPDM Pond Liner Tape or to repair a hole in your pond liner? This section shoiws you how with detailed illustrated intructions from Firestone Specialty Products.
Contains enough material for seaming 25 linear feet of EPDM liner
Seam preparation treatment
25 feet of 3" seaming tape
Firestone Lap Sealant is specifically designed edge treatment used to ensure a watertight seal while seaming two PondGard EPDM liners.
This adhesive caulk serves as a final precaution...
Firestone QuickSeam Pipe Boot - Specifically designed to be used in approved Firestone membrane applications for flashing of round pipes. Each pipe boot includes a universal stainless steel...
Firestone QuickPrime Plus is designed to clean and prime Firestone PondGard EPDM Pond Liners and Firestone 45 mil EPDM Pond Liners prior to the application of:
6" diameter circular membrane patch with adhesive backing to repair small cuts or punctures.
3" & 6" wide, double-sided adhesive tape used to join two pond liners; forming a water-tight seal.
Repairs EPDM, PVC, and Polyethylene liners. Suitable for underwater use and can also be...
Firestone Silicone Hand Roller
Firestone Splice Adhesive is designed for splicing EPDM Pond Liners and adhering to various substrates as indicated in the Firestone Specialty Products specifications and details.
Firestone Water Block Seal (S-20) is designed to provide a seal when used in compression as required by Firestone Specialty Products specifications and details.
METHOD OF APPLICATION:
Firestone Termination Bar is intended for attaching and sealing flashing terminations as outlined by Firestone Specialty Products Specifications and details.
Firestone Termination Bar...