Description
Aquascape AquaBlox Water Storage Module - Small
Aquascape’s AquaBlox modular water storage system is an efficient way to maximize your water storage capacity in Pondless Waterfall reservoirs.
The Aquascape AquaBlox® Water Storage Module displaces water for use with Pondless Waterfall reservoirs, rainwater harvesting projects, and other various water feature applications. AquaBlox are manufactured using recycled materials and designed to efficiently maximize water storage capacity, providing the ability to hold more water with a smaller reservoir footprint. Each AquaBlox will hold approximately 7.4 gallons of water per cubic foot, allowing over 3 times the water storage capacity than gravel will provide. This extra storage capacity will mean less time needed to top off the reservoir due to evaporation.
Using AquaBlox will also decrease the amount of labor, liner, and underlayment required during installation. The load-bearing top will support up to 5,472 pounds per square foot, providing years of trouble-free enjoyment and allowing for installation in a wide variety of situations. Aquascape AquaBlox are easier to clean, less prone to clogging, and come complete with the top, bottom, two sides and four structural supports.
Features:
- Over 3 times more water storage capacity than gravel
- The AquaBlox can hold approximately 7.4 gallons of water per cubic foot. Gravel only holds approximately 2.2 gallons of water per cubic foot.
- Extra water storage capacity results in less routine maintenance topping reservoir to compensate for evaporation.
- Easier to clean and less prone to clogging than traditional gravel basins.
- Smaller reservoirs! The ability to hold more water per cubic foot allows for smaller reservoirs.
- Less labor for excavation and moving gravel for basin.
- Uses less liner and geotextile underlayment
Specifications:
- Size: 26.5" L x 16" W x 9.5" H
- Volume: 17 gallons
- Load Bearing Weight: 5,472 lbs./sq. ft.
- Weight: 10.35 lbs.
