Description
Pro+ Black Waterfall Foam (24 oz.)
The Professional’s Secret to Perfect Waterfall Flow
Pro+ Black Waterfall Foam is a high-performance, expanding polyurethane sealant designed specifically for the construction and repair of ponds, waterfalls, and streams. This 24 oz. canister is the go-to choice for professionals and serious DIYers who want to maximize water flow and create a seamless, natural look.
By filling the joints and gaps between rocks and boulders, this foam prevents water from "disappearing" behind or beneath stones, ensuring it cascades over the face of the waterfall exactly where you want it.
Key Features:
-
High Yield: One 24 oz. professional canister provides the equivalent output of approximately five standard DIY foam cans, making it ideal for larger projects.
-
Natural Appearance: The deep black color is formulated to blend effortlessly into the shadows between wet rocks and gravel for a finish that goes unnoticed.
-
Faster Curing: Dries fast and lasts longer than standard consumer-grade foams, saving you time during installation.
-
Precision Application: Designed specifically for use with a Foam Gun Applicator (sold separately), allowing for pinpoint accuracy, controlled flow, and the ability to start and stop without clogging.
-
Air-Tight Seal: The specialized can design creates an air- and moisture-tight seal when attached to a gun, preventing the foam from hardening inside the can and minimizing waste.
Product Specifications:
-
Size: 24 oz. (680g)
-
Type: Expanding Black Polyurethane Foam
-
Application: Requires a professional foam gun
Common Applications:
-
Filling voids between waterfall rocks to direct water flow.
-
Securing liner edges and preventing water loss in stream beds.
-
Filling gaps in rock walls or stone steps within a water feature.
-
Locking smaller stones into place for structural stability.
Why Use Professional Foam Over DIY Cans? Standard "straw-dispensed" foam cans are difficult to control and often result in significant waste because the straw clogs after a single use. The Pro+ System uses a dedicated dispensing gun that allows you to adjust the bead size and leave the can attached for weeks at a time without the foam curing, making it far more economical and easier to use for detailed work.
Installation Tip: For the best results, mist the area with water before applying the foam; polyurethane foam cures via moisture, and a damp surface will help it expand and bond more effectively. Once dry, any excess foam can be trimmed with a knife or covered with a light dusting of rock dust or gravel to further hide the seal.
Required & Recommended Accessories:
- Pro+ Foam Gun: Necessary to use the foam.
-
Pro+ Foam Gun Cleaner: Necessary for flushing the gun after the project is complete to ensure a lifetime of use.
