Sequence Primer Pots - Primer Pots Leaf Baskets
Home Page Contact Us View Cart
Phone: (215) 788-5103

Primer Pots Leaf Baskets » Sequence Primer Pots


Sequence Primer Pots

Sequence Primer Pots

Priming Pot/Leaf Trap for External Centrifugal Pumps

  • 1.5" MNPT Inlet Port/1.5" Slip Discharge Port
  • 2.0" MNPT Inlet Port/2" Slip Discharge Port
  • Works with the Sequence 750 Series and the PuriPumps

The strainer basket is designed to facilitate the priming of the pump and suction line. It is not designed to remove air from the suction line. This trap will also work as a strainer basket to trap leaves and debris. Use when your pump is mounted above the water level.


Matala Pond Vac II
Matala Pond Vac II This "Muck Buster" has 4x more power than PondTec Vac in a suction test. Suction lift 5-ft above water. Auto fill and drain cycle....
Read more »»»
Laguna Pond Netting
Laguna Pond Netting Laguna Pond Netting is designed to make your pond keeping experience a more enjoyable one. It keeps leaves and debris out of your pond reduc...
Read more »»»
Sequel Kohaku Pump -...
Sequel Kohaku Pump - 4100 GPH Sequel Kohaku Pump This is a strong compact and reliable model for your small pond at 4,000 gallons or less. This model contains 3 impeller...
Read more »»»

Koi & Pond Tip of the Day
October 12th, 2008
If you have a quartz sleeve make sure and clean it with acetone when you change your bulb to truly have a clean quartz sleeve. As a general rule of thumb, you should change your UV bulb after about 8,000 hours use. This is about once a year.
Tips by » Koi Clubs USA