May 25, 2012

EasyPro Rainwater System

EasyPro Rainwater System

EasyPro Rainwater Containment Systems allow you to capture and store rainwater from roof tops, permeable patios, driveways, etc. for later use in irrigati ...

Rainwater Downspout Filter

Rainwater Downspout Filter

The downspout filter is used to capture debris from roof water before going into the reservoir. A fine mesh debris net lies just under the grating which i ...

Rainwater High Pressure Pump

Rainwater High Pressure Pump

This is the high pressure pump included with each Rainwater Containment System. It is a silent alternative to traditional external pumps, and the internal ...

Computerized Pump Controller

Computerized Pump Controller

This Pump Controller automatically turns the High Pressure Pump for the Rainwater Containment System on and off.

EasyPro Eco-Series Pump Vault

EasyPro Eco-Series Pump Vault

The Eco-Series Pump Vault is a low cost way to ensure easy access to the pump in pond-less water features. Makes inspection or maintenance of the pump muc ...

EasyPro Pro-Series Pond Vault

EasyPro Pro-Series Pond Vault

Built heavy duty to withstand the pressure of being buried under rock The slots cut in the sides allow water into the pump < ...

EasyPro Standard Reservoir Cubes

EasyPro Standard Reservoir Cubes

Reservoir Cubes (Res-Cubes) are a great way to simplify installation of Just-A-Falls, formal fountains and other basins typically using a large quantity o ...

EasyPro High Strength Full Res-Cubes

EasyPro High Strength Full Res-Cubes

While the standard res-cubes below work well in back-yard and light commercial applications, these heavy duty cubes can be used in high weight bearing fea ...

EasyPro Rainwater System

EasyPro Rainwater Containment Systems allow you to capture and store rainwater from roof tops, permeable patios, driveways, etc. for later use in irrigation, fountain basin and Just-A-Falls water feature replenishment. Available in 500, 1000 and 2000 gallon capacities or a custom sized system can be matched to your needs.

Each system comes complete with a high pressure, submersible irrigation pump complete with an automatic on/ off sensor. You can attach auto fill valves for water features or a garden hose for irrigation (or use a Y on the outlet and use both!). The sensor will automatically turn the pump on anytime the auto fill calls for
water or anytime you pull the trigger on the garden hose.

Extra large pond liner is included which can wrap around the top of the reservoir leaving only a small area of exposed stone in the center where the pump is located. This minimizes the visual foot print of the reservoir making it very easy to conceal!