Reducers for Jets
These reducers are used to reduce the outlet of the jet line into the pond, which should be 1 1/2 inch pipe, to 3/4 inch female thread. This will now allow an Eductor or Mazzi jet to be screwed into it. The standard 1 1/2 inch to 3/4 inch reducer bushing can be found at some hardware stores and is for use with a 1 1/2 inch bulkhead with threads on liner ponds. The Special Reducer is designed for gunite or concrete ponds where the 1 1/2 inch pipe for the jets extend into the pond. The pipe is cut off flush with the plaster and then the Special Reducer is tapped into the inside of the 1 1/2 inch pipe.
| SKU | Item Description | Price | Order |
|---|---|---|---|
| REDUCER | 1-1/2 inch to 3/4 inch Reducer for Jets (Liner) | $ 3.15 | Add To Cart |
| REDUCER -S | 1-1/2 inch to 3/4 inch Special Reducer for Jets (Concrete) | $ 6.55 | Add To Cart |
Eductor w/ Directional Fitting
Jets are an extremely important part of a successful pond. The two jets used in our Pond Systems are the Mazzei type and the Eductor type. The Eductor type jet works ...
Eductors
Jets are an extremely important part of a successful pond. The two jets used in our Pond Systems are the Mazzei type and the Eductor type. The Eductor type jet works ...
Flanged Connectors
Check out these wide Flanged Fittings for your pond return lines. Wide flange for better liner grip Easy and fast installation Leak free connect ...
Mazzei Jets
Jets are an extremely important part of a successful pond. For this reason the two jets used in Advantage Systems are the Mazzei type and the Eductor type. The Mazzei type jet is the ...
Tangential Pond Returns
Flanged Connectors make your return lines to the pond an easy installation. Pond return can be set at angle for better circulation Full smooth flow - no obstru ...
Wye Manifold
This is one super Wye. Manifold Wye with 2" slip sockets an all three ports.