Pentair Liner Fittings
Bulkhead fittings are used anytime it is necessary for a pipe to pass through a rubber liner.
They are relatively simple to install and when installed properly are very reliable.
Bulkhead fittings should be plumbed into the pond wall so that the face of the fitting is flush with the side of the pond.
1 1/2-inch Bulkhead Fitting, Thread on both sides, screws, vinyl liner.
| SKU | Item Description | Price | Order |
|---|---|---|---|
| BLKHD-1.5 | 1-1/2 in.Bulkhead Fitting (Pentair Aquatics) | $ 12.50 | Add To Cart |
Eductor w/ Directional Fitting
Jets are an extremely important part of a successful pond. The two jets used in our Pond Systems are the Mazzei type and the Eductor type. The Eductor type jet works ...
Eductors
Jets are an extremely important part of a successful pond. The two jets used in our Pond Systems are the Mazzei type and the Eductor type. The Eductor type jet works ...
Flanged Connectors
Check out these wide Flanged Fittings for your pond return lines. Wide flange for better liner grip Easy and fast installation Leak free connect ...
Mazzei Jets
Jets are an extremely important part of a successful pond. For this reason the two jets used in Advantage Systems are the Mazzei type and the Eductor type. The Mazzei type jet is the ...
Tangential Pond Returns
Flanged Connectors make your return lines to the pond an easy installation. Pond return can be set at angle for better circulation Full smooth flow - no obstru ...
Wye Manifold
This is one super Wye. Manifold Wye with 2" slip sockets an all three ports.
Reducers for Jets
These reducers are used to reduce the outlet of the jet line into the pond, which should be 1 1/2 inch pipe, to 3/4 inch female thread. This will now allow an Eductor or Mazzi jet to be screwed ...