Air Pumps and Accessories

-

Air Manifolds and Valves

Matala Compressor Manifold Kits

Matala Compressor Manifold Kits
Matala Compressor Manifold KitsMatala Compressor Manifold Kits

Matala aeration manifold kits are included with our Complete Rocking Piston Compressors.

They may also be purchase separately. They can be used for any compressor which has a 3/8" outlet.

The air manifold kits are available as a 2 way, 3 way or 4 way manifold. Each manifold includes necessary hardware to connect to the 3/8" outlet of your air compressor. The oil filled pressure gauge allows for an easy read of accurate psi within your system. It does not vibrate like a non-oil filled gauge. The pressure relief valve will open at approximately 50 psi to alleviate back pressure and potential damage to the compressor. The multiple brass valves are 3/8" and connect to a heat protection hose which then connects to your actual air hose. The heat protection hose dissipates the excess heat from the compressor before it reaches your softer air hose

Item #
Description
Price
QTY.
MPCA60
Matala Compressor Manifold Kits for MPC-60
$ 92.37
add Matala Compressor Manifold Kits for MPC-60 to cart
MPCA120
Matala Compressor Manifold Kits for MPC-120
$ 121.08
add Matala Compressor Manifold Kits for MPC-120 to cart
MPCA200-4
Matala Compressor Manifold Kits for MPC-200-4
$ 147.08
add Matala Compressor Manifold Kits for MPC-200-4 to cart

More Air Manifolds and Valves ↓

Hakko Air Manifolds

Hakko Air Manifolds

We recommend that you use these small manifolds for aquariums. These small air manifolds can exert too much back pressure on your pump if used incorrectly. You may use these small air manifolds to split your air to ceramic type air stones for aquarium applications or in cases where you need to put air stones in various locations ...
Remote Access Valve Assemblies

Remote Access Valve Assemblies

In some situations it is easier to locate a compressor near an existing power supply that is far away from the pond and extend the tubing rather than run power down to pond’s edge.Typically a single, larger diameter, poly tubing will carry all the air from the compressor down to the edge of the pond where the valve assembly will be ...
Rotary Vane Air Outlet Assemblies

Rotary Vane Air Outlet Assemblies

Rotary Vane Air Outlet AssembliesUse when operating two or more pond diffusers from a single pump, all fittings are galvanized steelBuilt-in pressure relief valve protects the pump in case airlines become kinked, plugged or frozenUnion coupling allows for quick and easy removal of the pumpA ...
Two-Way Splitter - 1/4 x 3/8-in.

Two-Way Splitter - 1/4 x 3/8-in.

Use the two way splitters to divide air from a single outlet to two separate lines. 1/2-in. brass ball valves are included to control airflow down each line. Standard inlet is 1/2-in. female pipe thread. Outlets on air valves are 1/2-in. tubing fitting. Other size fittings available upon request.
Two-Way Splitter - 1/2 x 1/2-in.

Two-Way Splitter - 1/2 x 1/2-in.

Use the two way splitters to divide air from a single outlet to two separate lines. 1/2-in. brass ball valves are included to control airflow down each line. Standard inlet is 1/2-in. female pipe thread. Outlets on air valves are 1/2-in. tubing fitting. Other size fittings available upon request.
Matala/ Hakko Manifolds

Matala/ Hakko Manifolds

This Matala/ Hakko 2 way and 4 way manifold is designed to reduce back pressure on your system. The brass manifold connects to your pump via a 3/4" barb. The Hakko Air Pump outlet fitting comes with a white L Tube that will connect directly to the 2 way Manifold. The outlets on the manifold are 3/8" barb.Use the 2 Way Heavy ...
Stratus Valved Outlet Assemblies

Stratus Valved Outlet Assemblies

Aluminum and brass designIncludes swivel union for easy removal from compressor1/4" air inlets - designed for use with Stratus compressors3/8" or 1/2" air outlet hoses will accept poly or weighted tubing
Airmax PS Series Airflow Manifolds

Airmax PS Series Airflow Manifolds

Replacement Manifold Assembly simplifies airflow management.
Airmax Mini Ball Valve

Airmax Mini Ball Valve

Replacement nickle-plated brass ball valve to adjust flow to individual diffusers.1/4" Chrome Mini Ball Valve MPTx FPT
© 2016-2017 Underwater Warehouse all rights reserved.