Look at all the Advantages: State of the art “Bead Filtration” which provides both an extremely efficient mechanical and biological filter all in one. A pressurized system which allows the filter to be located out of sight from the pond if desired. The lowest head pressure of any bead filter available today due to the unique inner head design (pat. pend). This means you can use the new energy efficient type pumps. All models come standard with a large 2 hp. blower which helps create the most efficient and easiest system to backwash available. Easy access to bead media (30 sec.). No plumbing to disconnect or remove; just unscrew top cap. The “Medication Cycle” not only allows you to bypass the beads when medicating the pond, but also to keep the beads thoroughly oxygenated during this critical period. A large 2 inch sight glass is installed so you can easily tell when the filter is clean during the backwash cycle. New - The only bead filter available with a clear top closure lid that now allows you to see into the filter durring backwashing to make sure the bead media is thoroughly mixing. A “Guarantee” that no one can beat! If you are not completely satisfied with any Advantage filter during the first year of operation for any reason, we will buy back the filter and pay the return shipping charges. The filter comes in three sizes: Advantage 5 - for ponds up to 5,000 gallons Advantage 10 - for ponds up to 10,000 gallons Advantage 15 - for ponds up to 15,000 gallons
You should stop feeding your aquatic plants about a month before the first frost in your area. Even in areas that don't normally have frost, plant growth slows in the shorter, cooler days of the fall and winter months.
